LiftMaster CSW24UL Installation Manual - Page 2

TABLE OF CONTENTS, SAFETY, Safety Symbol and Signal Word Review - parts

Page 2 highlights

TABLE OF CONTENTS SAFETY 2 Safety Symbol and Signal Word Review 2 Usage Class 3 UL325 Entrapment Protection Requirements 3 Safety Installation Information 4 Gate Construction Information 5 INTRODUCTION 6 Carton Inventory 6 Operator Specifications 7 Site Preparation 8 Check Your Gate 8 INSTALLATION 9 Types of Installations 9 Step 1 Determine Location for Concrete Pad and Operator 10 Step 2 Concrete Pad and Operator Attachment 12 Step 3 Position the Gate Bracket 13 Step 4 Adjust the Operator Arm Length 13 Step 5 Secure the Operator Arm 14 Step 6 Install Entrapment Protection 15 Step 7 Earth Ground Rod 17 Step 8 Power Wiring 17 Step 9 Connect Batteries 19 Step 10 Dual Gate Setup 21 Step 11 Install the Cover 23 ADJUSTMENT 24 Limit and Force Adjustment 24 Obstruction Test 25 PROGRAMMING 26 Remote Controls (Not Provided 26 LiftMaster Internet Gateway (not provided 27 Erase All Codes 27 Erase limits 27 Gate Hold Open Feature 27 To Remove and Erase Monitored Entrapment Protection Devices.......27 OPERATION 28 Gate Operator Setup Examples 28 Control Board Overview 29 Manual Disconnect 30 Reset Switch 30 Operator Alarm 30 Remote Control 30 ACCESSORY WIRING 31 External Control Devices 31 Locks 32 Miscellaneous Wiring 32 EXPANSION BOARD 33 Expansion Board Overview 33 Aux relay 1 and 2 34 Wiring Accessories to the Expansion Board 35 MAINTENANCE 36 Important Safety Instructions 36 Maintenance Chart 36 Batteries 37 TROUBLESHOOTING 38 Diagnostic Codes 38 Diagnostic Codes Table 39 Control Board LEDs 41 Troubleshooting Chart 42 APPENDIX 45 Step 8 Solar Panel(s 45 SAMS Wiring with Relays Not Energized 49 Dual Gate Settings 49 Limit Setup with a Remote Control 50 WIRING DIAGRAM 51 REPAIR PARTS 52 ACCESSORIES 53 WARRANTY 55 SAFETY Safety Symbol and Signal Word Review When you see these Safety Symbols and Signal Words on the following pages, they will alert you to the possibility of Serious Injury or Death if you do not comply with the warnings that accompany them. The hazard may come from something mechanical or from electric shock. Read the warnings carefully. When you see this Signal Word on the following pages, it will alert you to the possibility of damage to your gate and/or the gate operator if you do not comply with the cautionary statements that accompany it. Read them carefully. IMPORTANT NOTE: • BEFORE attempting to install, operate or maintain the operator, you must read and fully understand this manual and follow all safety instructions. • DO NOT attempt repair or service of your gate operator unless you are an Authorized Service Technician. MECHANICAL ELECTRICAL WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. 2

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56

2
SAFETY
2
Safety Symbol and Signal Word Review
................................................
2
Usage Class
...........................................................................................
3
UL325 Entrapment Protection Requirements
........................................
3
Safety Installation Information
...............................................................
4
Gate Construction Information
...............................................................
5
INTRODUCTION
6
Carton Inventory
....................................................................................
6
Operator Specifications
..........................................................................
7
Site Preparation
.....................................................................................
8
Check Your Gate
....................................................................................
8
INSTALLATION
9
Types of Installations
.............................................................................
9
Step 1 Determine Location for Concrete Pad and Operator
.................
10
Step 2 Concrete Pad and Operator Attachment
...................................
12
Step 3 Position the Gate Bracket
.........................................................
13
Step 4 Adjust the Operator Arm Length
...............................................
13
Step 5 Secure the Operator Arm
..........................................................
14
Step 6 Install Entrapment Protection
...................................................
15
Step 7 Earth Ground Rod
.....................................................................
17
Step 8 Power Wiring
............................................................................
17
Step 9 Connect Batteries
.....................................................................
19
Step 10 Dual Gate Setup
......................................................................
21
Step 11 Install the Cover
.....................................................................
23
ADJUSTMENT
24
Limit and Force Adjustment
.................................................................
24
Obstruction Test
..................................................................................
25
PROGRAMMING
26
Remote Controls (Not Provided)
.........................................................
26
LiftMaster Internet Gateway (not provided)
.........................................
27
Erase All Codes
....................................................................................
27
Erase limits
..........................................................................................
27
Gate Hold Open Feature
.......................................................................
27
To Remove and Erase Monitored Entrapment Protection Devices
.......
27
OPERATION
28
Gate Operator Setup Examples
............................................................
28
Control Board Overview
.......................................................................
29
Manual Disconnect
..............................................................................
30
Reset Switch
........................................................................................
30
Operator Alarm
....................................................................................
30
Remote Control
....................................................................................
30
ACCESSORY WIRING
31
External Control Devices
......................................................................
31
Locks
...................................................................................................
32
Miscellaneous Wiring
...........................................................................
32
EXPANSION BOARD
33
Expansion Board Overview
..................................................................
33
Aux relay 1 and 2
.................................................................................
34
Wiring Accessories to the Expansion Board
........................................
35
MAINTENANCE
36
Important Safety Instructions
..............................................................
36
Maintenance Chart
...............................................................................
36
Batteries
...............................................................................................
37
TROUBLESHOOTING
38
Diagnostic Codes
.................................................................................
38
Diagnostic Codes Table
.......................................................................
39
Control Board LEDs
.............................................................................
41
Troubleshooting Chart
.........................................................................
42
APPENDIX
45
Step 8 Solar Panel(s)
...........................................................................
45
SAMS Wiring with Relays Not Energized
.............................................
49
Dual Gate Settings
...............................................................................
49
Limit Setup with a Remote Control
......................................................
50
WIRING DIAGRAM
51
REPAIR PARTS
52
ACCESSORIES
53
WARRANTY
55
WARNING:
This product can expose you to chemicals including lead, which are known to the State of California to cause cancer or birth defects
or other reproductive harm. For more information go to
www.P65Warnings.ca.gov
.
When you see these Safety Symbols and Signal Words on the following pages, they will alert
you to the possibility of
Serious Injury or Death
if you do not comply with the warnings that
accompany them. The hazard may come from something mechanical or from electric shock.
Read the warnings carefully.
When you see this Signal Word on the following pages, it will alert you to the possibility of
damage to your gate and/or the gate operator if you do not comply with the cautionary
statements that accompany it. Read them carefully.
IMPORTANT NOTE:
BEFORE attempting to install, operate or maintain the operator, you must read and fully
understand this manual and follow all safety instructions.
DO NOT attempt repair or service of your gate operator unless you are an Authorized
Service Technician.
MECHANICAL
ELECTRICAL
TABLE OF CONTENTS
SAFETY
Safety Symbol and Signal Word Review