Lexmark MX331 Quick Reference - Page 10

Paper jam in the duplex unit

Get Lexmark MX331 PDF manuals and user guides View all Lexmark MX331 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

10 Remove the optional tray. Warning-Potential Damage: Do not touch the photoconductor drum. Doing so may affect the quality of future print jobs. 11 Remove the jammed paper. Note: Make sure that all paper fragments are removed. 3 Remove the jammed paper. CAUTION-HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching it. Note: Make sure that all paper fragments are removed. 12 Insert the tray. Paper jam in the duplex unit 1 Open the front door. Warning-Potential Damage: To prevent damage from electrostatic discharge, touch any exposed metal frame of the printer before accessing or touching interior areas of the printer. 2 Remove the imaging unit. Warning-Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems. 10 4 Insert the imaging unit. 5 Close the door.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
10
Remove the optional tray.
11
Remove the jammed paper.
Note:
Make sure that all paper fragments are removed.
12
Insert the tray.
Paper jam in the duplex unit
1
Open the front door.
Warning—Potential Damage:
To prevent damage from
electrostatic discharge, touch any exposed metal frame of
the printer before accessing or touching interior areas of the
printer.
2
Remove the imaging unit.
Warning—Potential Damage:
Do not expose the imaging
unit to direct light for more than 10 minutes. Extended
exposure to light may cause print quality problems.
Warning—Potential Damage:
Do not touch the
photoconductor drum. Doing so may affect the quality of
future print jobs.
3
Remove the jammed paper.
CAUTION—HOT SURFACE:
The inside of the printer
might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching
it.
Note:
Make sure that all paper fragments are removed.
4
Insert the imaging unit.
5
Close the door.
10