LevelOne GTL-2880 Manual - Page 219
Selected Counters, Attached MAC Addresses, VLAN ID
![]() |
View all LevelOne GTL-2880 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 219 highlights
• Single 802.1X • Multi 802.1X Backend Server Counters : These backend (RADIUS) frame counters are available for the following administrative states: • Port-based 802.1X • Single 802.1X • Multi 802.1X • MAC-based Auth. Last Supplicant/Client Info : Information about the last supplicant/client that attempted to authenticate. This information is available for the following administrative states: • Port-based 802.1X • Single 802.1X • Multi 802.1X • MAC-based Auth. Selected Counters Selected Counters : The Selected Counters table is visible when the port is in one of the following administrative states: • Multi 802.1X • MAC-based Auth. The table is identical to and is placed next to the Port Counters table, and will be empty if no MAC address is currently selected. To populate the table, select one of the attached MAC Addresses from the table below. Attached MAC Addresses Identity : Shows the identity of the supplicant, as received in the Response Identity EAPOL frame. Clicking the link causes the supplicant's EAPOL and Backend Server counters to be shown in the Selected Counters table. If no supplicants are attached, it shows No supplicants attached. This column is not available for MAC-based Auth. MAC Address : For Multi 802.1X, this column holds the MAC address of the attached supplicant.For MACbased Auth., this column holds the MAC address of the attached client. Clicking the link causes the client's Backend Server counters to be shown in the Selected Counters table. If no clients are attached, it shows No clients attached. VLAN ID This column holds the VLAN ID that the corresponding client is currently secured through the Port Security module. State : The client can either be authenticated or unauthenticated. In the authenticated state, it is allowed to forward frames on the port, and in the unauthenticated state, it is blocked. As long as the backend server hasn't successfully authenticated the client, it is unauthenticated. If an authentication fails for one or the other reason, the client will remain in the unauthenticated state for Hold Time seconds. Last Authentication : 211
![](/manual_guide/products/levelone-gtl2880-manual-9b617ac/219.png)