Lantronix XPress-DR-IAP APS: Installing Protocols
Lantronix XPress-DR-IAP Manual
View all Lantronix XPress-DR-IAP manuals
Add to My Manuals
Save this manual to your list of manuals |
Lantronix XPress-DR-IAP manual content summary:
- Lantronix XPress-DR-IAP | APS: Installing Protocols - Page 1
Automation Protocols Suite (APS) Installing Protocols Rev. A March 22, 2001 - Lantronix XPress-DR-IAP | APS: Installing Protocols - Page 2
Contents Installing a Protocol from the APS CD 1 Step 1: Access the Firmware 1 Step 2: Assign an IP Address 1 Step 3: Ping the Device Server 2 Step 4: Query the Device Server 3 Step 5: Load the Protocol 3 Telnet to the Device Server 4 - Lantronix XPress-DR-IAP | APS: Installing Protocols - Page 3
Installing a Protocol from the APS CD The Device Server comes with the Standard protocol installed. You can install another protocol by following these steps. If you later decide to re-install the Standard protocol, - Lantronix XPress-DR-IAP | APS: Installing Protocols - Page 4
2 In the Enter IP Address to assign field, type the IP address of the Device Server (XXX.XXX.XXX.XXX format). 3 In the Enter the Hardware or Ethernet Address field, type the Ethernet address listed on the Device Server label (on the bottom). This is the MAC address. 4 Click the Set IP Address button - Lantronix XPress-DR-IAP | APS: Installing Protocols - Page 5
Step 4: Query the Device Server 1 Click the Device Info icon or select Tools!Query Device. The Query Device window displays. The IP address displays at the top. 2 Click the Get Device Information button. The Device Information fields display information. Firmware Type indicates the protocol that - Lantronix XPress-DR-IAP | APS: Installing Protocols - Page 6
successful message displays. 5 Click OK. Note: If desired, run another query to confirm that the protocol has been installed. Telnet to the Device Server To view or update the Device Server configuration, you first open a Telnet connection. 1 Click the Telnet icon or select Tools! Telnet to
Automation Protocols Suite (APS)
Installing Protocols
Rev. A
March 22, 2001