Kyocera ECOSYS P3055dn ECOSYS P3045dn/P3050dn/P3055dn/P3060dn Operation Guide - Page 183
Disp. Backlight (Display backlight setting), Error Handling (Error detection setting)
![]() |
View all Kyocera ECOSYS P3055dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 183 highlights
Operation Panel Disp. Backlight (Display backlight setting) Set the backlight for the message display. Disp. Backlight: 01*On 02 Off 03 Touched 1 In the Device Common menu, press or to select Disp. Backlight. 2 Press [OK]. The Disp. Backlight screen appears. The list shows the following display backlight settings: On (Standard) Off (No backlight) Touched (Backlight lights up when the key on the operation panel is pressed) Note If Touched is selected, the backlight turns off again when the panel is reset after the setting time of Auto Panel Reset has passed or when [Logout] is pressed. 3 Press or to select the desired backlight setting. 4 Press [OK]. The backlight setting is set and the Device Common menu reappears. Error Handling (Error detection setting) This specifies the settings for the detection methods used for duplex printing errors and for paper size and paper type errors when the paper source is fixed. The options available in Error Handling are as follows: • DuplexPaperError (Duplex printing error detection setting)...4-103 • Paper Mismatch (Detection settings for paper size/type errors when the paper source is fixed)...4-104 • InsertMismatch (Action when size error occurs during paper feeding)...4-104 • MP Tray Empty (Warning when the MP tray is empty)...4-104 1 In the Device Common menu, press or to select Error Handling. Error Handling: 2 Press [OK]. The Error Handling menu screen appears. 01 DuplexPaperError 02 Paper Mismatch 03 InsertMismatch Exit DuplexPaperError (Duplex printing error detection setting) If the error detection setting for duplex printing has been turned Display Error, and you attempt to print onto a paper size and paper type that cannot be used for duplex printing, the Duplex disabled error message will be displayed and printing will stop. 1-sided Display Error • To print onto one-side of the paper. • To print onto one-side of the paper only when this message is displayed, press [OK]. • Press [Cancel] to cancel the printing itself. 1 In the Error Handling menu, press or to select DuplexPaperError. 4-103
![](/manual_guide/products/kyocera-ecosys-p3060dn-ecosys-p3045dnp3050dnp3055dnp3060dn-operation-guide-79976ff/183.png)