Kyocera ECOSYS M3660idn M3655idn/M3660idn/M3145idn/M3645idn Operation Guide - Page 418
Adjustment/Maintenance, Display the screen., Perform the drum refresh., Load paper.
View all Kyocera ECOSYS M3660idn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 418 highlights
Troubleshooting > Troubleshooting Adjustment/Maintenance Drum Refresh/Drum Refresh 1 Remove image blur from the printout. NOTE Drum Refresh 1 cannot be performed while printing. Execute Drum Refresh 1 after the printing is done. 1 Display the screen. [System Menu/Counter] key > [Adjustment/Maintenance] > [Drum Refresh 1] 2 Perform the drum refresh. Select [Start]. "Drum Refresh 1" begins. Drum Refresh 2 (ECOSYS M3655idn/ECOSYS M3660idn only) Remove white dots from the printout. NOTE Drum Refresh 2 cannot be performed while printing. Execute Drum Refresh 2 after the printing is done. 1 Load paper. Load A4 or Letter size paper into the Multipurpose tray. 2 Display the screen. [System Menu/Counter] key > [Adjustment/Maintenance] > [Drum Refresh 2] 3 Perform the drum refresh. Select [Start]. "Drum Refresh 2" begins. NOTE When you run [Drum Refresh 2], the machine sometimes makes a vibrating sound for about 80 seconds until drum refreshing is completed. The toner soiling on the ejected paper is normal and does not indicate a fault. 10-30