Kyocera ECOSYS M3660idn M3655idn/M3660idn/M3145idn/M3645idn Operation Guide - Page 403

Troubleshooting > Troubleshooting Symptom The altitude is 1000 m or ― higher and irregular horizontal white lines appear in the image. Checkpoints Corrective Actions Reference Page Select the [System Menu/Counter] key ― > [Adjustment/Maintenance] > [Service Setting] > [Altitude Adjustment], and set to an elevation one level higher than the current setting. The altitude is 1000 m or ― higher and dots appear in the image. Select the [System Menu/Counter] key ― > [Adjustment/Maintenance] > [Service Setting] > [Altitude Adjustment], and set to an elevation one level higher than the current setting. Paper often jams. 2 or more sheets are overlaps when ejected. (multi feed) Is the paper loaded correctly? Is the paper of the supported type? Is it in good condition? Is the paper curled, folded or wrinkled? Are there any loose scraps or jammed paper in the machine? ― Load the paper correctly. Remove the paper, turn it over, and reload it. Replace the paper with new paper. Remove any jammed paper. Load the paper correctly. page 3-2 page 3-4 page 3-4 page 10-31 page 3-2 Printouts are wrinkled. Is the paper loaded correctly? Is the paper damp? Load the paper correctly. Replace the paper with new paper. page 3-2 page 3-2 Printouts are curled. Is the paper damp? Replace the paper with new paper. page 3-2 Cannot print. Is the machine plugged in? Is the machine powered on? Are the USB cable and network cable connected? Is the print job paused? Plug the power cord into an AC outlet. Turn on the power switch. Connect the correct USB cable and network cable securely. Resume printing. ― page 2-10 page 2-8 page 7-10 10-15