Konica Minolta bizhub 4422 bizhub 4422 Quick Reference Guide
Konica Minolta bizhub 4422 Manual
 |
View all Konica Minolta bizhub 4422 manuals
Add to My Manuals
Save this manual to your list of manuals |
Konica Minolta bizhub 4422 manual content summary:
- Konica Minolta bizhub 4422 | bizhub 4422 Quick Reference Guide - Page 1
ADF tray or on the scanner glass. Note: To avoid a cropped image, make sure that the original document and output have the same paper size 4 If necessary, configure other fax settings. 5 Send the fax job. For Macintosh users 1 With a document open, choose File > Print. 2 Select the printer and enter - Konica Minolta bizhub 4422 | bizhub 4422 Quick Reference Guide - Page 2
height is below the maximum paper fill indicator. • Do not slide paper into the tray. Load paper as shown in the illustration. 2 Adjust the guide to match the size of the paper that you are loading. Warning-Potential Damage: Do not use envelopes with stamps, clasps, snaps, windows, coated linings - Konica Minolta bizhub 4422 | bizhub 4422 Quick Reference Guide - Page 3
. Note: For details of the function of the printer driver, refer to the Help of the printer driver. Maintaining the printer Replacing the toner cartridge 1 Open the front door. 2 Remove the used toner cartridge. 3 Unpack the new toner cartridge, and then shake it three times to redistribute the - Konica Minolta bizhub 4422 | bizhub 4422 Quick Reference Guide - Page 4
the printer as guides. 4 Unpack the new imaging unit, and then shake it three times to redistribute the toner. Warning-Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems. Warning-Potential Damage - Konica Minolta bizhub 4422 | bizhub 4422 Quick Reference Guide - Page 5
door. Note: Dispose of the used imaging unit according to your local regulations. Do not burn the imaging unit. Clearing jams Avoiding jams Load paper the printer reprints jammed pages. • Make sure that the paper guides are positioned correctly and are not pressing tightly against the paper - Konica Minolta bizhub 4422 | bizhub 4422 Quick Reference Guide - Page 6
the tray. 2 Open the front door. 3 Remove the toner cartridge. 4 Remove the imaging unit. Warning-Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems. Warning-Potential Damage: Do not touch the - Konica Minolta bizhub 4422 | bizhub 4422 Quick Reference Guide - Page 7
a hot component, allow the surface to cool before touching it. 7 Insert the toner cartridge. Note: Use the arrows inside the printer as guides. 2 Remove the jammed paper. Note: Make sure that all paper fragments are removed. 6 Insert the imaging unit. Note: Use the arrows inside the printer as - Konica Minolta bizhub 4422 | bizhub 4422 Quick Reference Guide - Page 8
Paper jam in the duplex unit 1 Remove the tray. Paper jam in trays 1 Remove the tray. 3 Close the rear door. Paper jam in the standard bin Remove the jammed paper. Note: - Konica Minolta bizhub 4422 | bizhub 4422 Quick Reference Guide - Page 9
fragments are removed. 2 Open the ADF cover. 3 Flex, fan, and align the paper edges before loading. 4 Reload paper, and then adjust the paper guide. 3 Remove the jammed paper. Note: Make sure that all paper fragments are removed. 4 Close the ADF cover. Paper jam in the automatic document feeder
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
 |
 |
Quick Reference
Copying
Making copies
1
Load an original document into the ADF tray or on the scanner
glass.
Note:
To avoid a cropped image, make sure that the original
document and output have the same paper size.
2
From the home screen, touch
Copy
, and then specify the
number of copies.
If necessary, adjust the copy settings.
3
Copy the document.
Note:
To make a quick copy, from the control panel, press
.
Copying on both sides of the paper
(two
‑
sided)
1
Load an original document into the ADF tray or on the scanner
glass.
2
From the home screen, touch
Copy
>
Settings
>
Paper Setup
.
3
Adjust the settings.
4
Copy the document.
Copying multiple pages onto a single
sheet
1
Load an original document into the ADF tray or on the scanner
glass.
2
From the home screen, touch
Copy
>
Pages per Side
.
3
Adjust the settings.
4
Copy the document.
Faxing
Sending a fax
Using the control panel
1
Load the original document into the ADF tray or on the scanner
glass.
2
From the home screen, touch
Fax
, and then enter the needed
information.
3
If necessary, configure other fax settings.
4
Send the fax job.
Using the computer
For Windows users
1
With a document open, click
File
>
Print
.
2
Select the printer, and then click
Properties
,
Preferences
,
Options
, or
Setup
.
3
Click
Fax
>
Enable fax
, and then enter the recipient number.
4
If necessary, configure other fax settings.
5
Send the fax job.
For Macintosh users
1
With a document open, choose
File
>
Print
.
2
Select the printer and enter the recipient number.
3
If necessary, configure other fax settings.
4
Send the fax job.
E-mailing
Sending an e-mail
Using the control panel
1
Load an original document into the ADF tray or on the scanner
glass.
2
From the home screen, touch
E-mail
, and then enter the
needed information.
Note:
You can also enter the recipient using the address
book or shortcut number.
3
If necessary, configure the output file type settings.
4
Send the e-mail.
Using the shortcut number
1
From the control panel, press
#
, and then enter the shortcut
number using the keypad.
2
Send the e
‑
mail.
Loading paper
Loading trays
CAUTION—TIPPING HAZARD:
To reduce the risk of
equipment instability, load each tray separately. Keep all
other trays closed until needed.
1
Remove the tray.
Note:
To avoid paper jams, do not remove trays while the
printer is busy.
1