Kenwood XD-6551 User Manual - Page 37

To stop playback 37 For the systems including the DP-H5 Playback of CD XD SERIES (En/E2) Auto space function (Remote control unit only) When the SPACE key is pressed during programming of tracks, a non-recorded space of a few seconds will be created between tracks. By recording tracks with these spaces on tape, the search and repeat play operations of tape using the DPSS function (which works by searching the non-recorded spaces) can be performed reliably. ÷ Even when the performances of two tracks are continuous (which occurs with classical or live recording music), the spaces will be created if they have different track Nos. ÷ To cancel the auto space function, press the P.MODE key or the SPACE key again. Preparation section Basic section Application section 7 To check the programmed tracks Remote control unit only Blinks Track No. Program No. CHECK To add a track to the program 1 Select the track. 1 2 3 4 5 6 7 8 9 PTY SEARCH 0 +10 Go to step 2 within 8 seconds. 2 Establish the selection. P.MODE PGM MEMO EDIT AUTO DISC ALL TUNED STEREO MAX RDS EON TA NEWS INFO. TP PTY TOTAL SPACE C D * ) 3 * P -:) 1 kHz MHz PROG. MUTE N.B. 12 12 3 4 5 6 7 8 9 10 11 12 13 14 15 ÷ Each time the key is pressed, the program No. (P-NO) and the disc No. are displayed. ÷ The previous display resumes in a few seconds. To clear tracks from the program Press to clear tracks from the end. ÷ Add the desired tracks to the program by repeating steps 1 and 2 for each. ÷ The added track number is added to the end of the existing program. Remote control CLEAR unit only ÷ Each time the key is pressed, the last track in the program is cleared. ÷ The track being played cannot be cleared. To clear all track. P.MODE ÷ The entire program contents also are erased when the disc tray is opened. Knowledge sections