Kenwood VRS-6100 Instruction Manual - Page 33
Center Width mode
View all Kenwood VRS-6100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Convenient functions Center Width mode (Only when the input signal is a 2-channel signal in the DOLBY PRO LOGIC IIx MUSIC or DOLBY PRO LOGIC II MUSIC mode) Center width adjustment allows you to enjoy an enhanced sound when listening to music through center image from only center speaker, or left and right speakers or various combinations adjustments. 1 Press the RECEIVER key on the remote control unit to set it to the receiver control mode. 2 Press the SOUND key repeatedly until the "CENTER WIDTH" indication appears. ÷ When the center speaker is switched OFF, this mode will not be effective. 3 Use the MULTI CONTROL button (or the MULTI CONTROL %/fi keys) to adjust the left-center-right output. Center image will be heard from center speaker only. Display dimmer adjustment The dimmer function lets you select the brightness of the receiver's display. You might find this useful if you darken your room to watch movies or listen to music. Each time you press the DIMMER key, the display's brightness changes among the three available settings. Select the brightness level you find most pleasing. 1 Bright 2 Medium 3 Dark L R Center image will be heard from left and right speakers only. L R ÷ When in other position, center image from center speaker, left and right speakers can be heard simultaneously with various combinations. Midnight mode (DOLBY DIGITAL and DTS mode only) When watching movies at night , you might not be able to raise the volume as loud as normal. Midnight mode compresses the dynamic range of previously specified parts of the DOLBY DIGITAL or DTS sound track (like scenes with sudden increases in volume) to minimize the difference in volume between the specified and non-specified parts. This makes it easy to hear all of the sound track, even when listening at low volumes. 1 Press the RECEIVER key on the remote control unit to set it to the receiver control mode. 2 Press the SOUND key repeatedly until the "NIGHT" indication appears. ÷ This can be selected only if DVD, VIDEO or FRONT AUX is selected as the source and the listen mode is set to "DOLBY DIGITAL" or "DTS". 3 Use the MULTI CONTROL button (or the MULTI CONTROL %/fi keys) to select the "NIGHT ON" or "NIGHT OFF" setting. 1 "NIGHT ON" 2 "NIGHT OFF" NIGHT ON ÷ The adjustment item is displayed for approximately 20 seconds. ÷ Some DOLBY DIGITAL or DTS software may not be compatible with the Midnight mode. 33 EN