Kenwood VRS-6100 Instruction Manual - Page 19
round speaker setting.
![]() |
View all Kenwood VRS-6100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Preparing for playback 6 Use the MULTI CONTROL button (or the MULTI CONTROL %/fi keys) to select the appropriate front speakers setting. 1 "FRNT LRG": Large front speakers are connected to the receiver. 2 "FRNT NML": Average size front speakers are connected to the receiver. ÷ When the subwoofer setting is "SUBW ON", front speakers setting is "FRNT LRG" and a stereo source is played, the low frequencies may be reproduced through the front speakers and no audio output from the subwoofer in certain listen modes. In this case, set the subwoofer re-mix setting in step $ to "REMIX ON" to output the low frequencies from the subwoofer. 7 Press the SETUP key to accept the setting. ÷ The center speaker setting indication "CNTR" appears. 8 Use the MULTI CONTROL button (or the MULTI CONTROL %/fi keys) to select the appropriate center speaker setting. If you selected "FRNT LRG" as the front speakers setting: 1 "CNTR LRG": A large center speaker is connected to the receiver. 2 "CNTR NML": An average size center speaker is connected to the receiver. 3 "CNTR OFF" : When no center speaker is connected. If you selected "FRNT NML" as the front speakers setting: 1 "CNTR NML": An average size center speaker is connected to the receiver. 2 "CNTR OFF": When no center speaker is connected. 9 Press the SETUP key to accept the setting. ÷ The surround speaker setting indication "SURR" appears. 0 Use the MULTI CONTROL button (or the MULTI CONTROL %/fi keys) to select the appropriate surround speaker setting. If you have selected "CNTR LRG" as the center speaker setting: 1 "SURR LRG": Large surround speakers are connected to the receiver. 2 "SURR NML": Average size surround speakers are connected to the receiver. 3 "SURR OFF" : When no surround speakers are connected. If you have selected other than "CNTR LRG" as the center speaker setting: 1 "SURR NML": Average size surround speakers are connected to the receiver. 2 "SURR OFF": When no surround speakers are connected. ÷ When "SURR OFF" is selected and the selection is established by pressing SETUP in step ! below, the procedure jumps to step $. However, if the subwoofer setting is "SUBW OFF", you can complete the speaker setup and proceed to the speaker volume level adjustment in step 5. ! Press the SETUP key to accept the setting. ÷ The surround back speaker setting indication "BS" appears. @ Use the MULTI CONTROL button (or the MULTI CONTROL %/fi keys) to select appropriate surround back speaker setting. If you selected "SURR LRG" as the surround speaker setting : 1 "BS LRG": Large surround back speaker is connected to the receiver. 2 "BS NML": Average size surround back speaker is connected to the receiver. 3 "BS OFF": When no surround speakers are connected. Bs LRG If you selected "SURR NML" as the surround speaker setting : 1 "BS NML" : Average size surround back speaker is connected to the receiver. 2 "BS OFF" : When no surround speakers are connected. # Press the SETUP key to accept the setting. ÷ The subwoofer re-mix setting indication "REMIX" appears. $ Use the MULTI CONTROL button (or the MULTI CONTROL %/fi keys) to select the appropriate subwoofer re-mix setting. If "REMIX ON" is selected as the subwoofer re-mix setting, the low frequencies are enhanced by adding the low frequencies of other channels to the subwoofer channel or adding the low frequencies of the subwoofer to other channels depending on the speaker setup. 1 "REMIX ON": Subwoofer re-mix setting mode to the receiver is ON. 2 "REMIX OFF": Subwoofer re-mix setting mode to the receiver is OFF. ÷ If subwoofer is turned "SUBW OFF", subwoofer re-mix setting is not visible. % Press the SETUP key to accept the setting. 19 EN
![](/manual_guide/products/kenwood-vrs6100-instruction-manual-304b55e/19.png)