Kenwood TM-G707E User Manual - Page 69
Vs-3 Voice Synthesizer Optional
![]() |
View all Kenwood TM-G707E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
VS-3 VOICE SYNTHESIZER (OPTIONAL) Install the optional VS-3 unit to use this function {page 67}. Each time you change the transceiver mode, such as VFO or Memory Recall, the transceiver automatically announces the new mode. The table below shows what the transceiver automatically announces when it enters a new mode. 1 In addition, the transceiver announces the displayed 2 information as follows when pressing Mic [6] in Microphone Control mode {page 60} or the PF key 3 programmed with Voice {page 51}. 4 • In VFO mode, announces the VFO frequency on the current 5 band beginning with the 100 MHz digit. For the MHz decimal point, announces "point". 6 Key Pressed New Mode Announcement [VFO] VFO "VFO" [MR] Memory Recall "MR" [CALL] Call Channel "Call" [PM] Programmable Memory "PM" [MNU] Menu "Menu" [BAND] Mic PF key programmed with Enter {page 51} 1 New operating band Keypad Direct Entry Current frequency "Enter" 1 When pressed in VFO or Memory Recall mode. • In Memory Recall mode, announces the channel number, 7 "channel", and the frequency. For the L or U channels, announces "low" or "up", the channel number, and the 8 frequency. For the Priority channel, announces "PR" and 9 the frequency. • In Channel Display mode, announces the channel number 10 and "channel". For the L or U channels, announces "low" or 11 "up" and the channel number. For the Priority channel, announces only "PR". 12 • In Call Channel mode, announces "call" and the frequency. 13 • While a tone frequency is being selected, announces the 14 tone frequency. 15 After installing the optional VS-3 unit, you can also reprogram the DIM button on the front panel with Voice. 16 Access Menu No. 18 (KEY), and select Voice (VOIC). 17 Note: 18 ◆ To deactivate the Voice Synthesizer function after installing the optional VS-3 unit, access Menu No. 17, and select OFF. 19 ◆ While using Transceiver Lock, the transceiver makes an 20 announcement only when pressing Mic [6] in Microphone Control mode or the PF key programmed with Voice. When in All Lock mode, 21 pressing these keys simply causes an error beep to sound; the transceiver does not make an announcement in any case. 22 ◆ The Voice Synthesizer function does not work while transmitting or scanning. 63
![](/manual_guide/products/kenwood-tmg707a-user-manual-f9febeb/69.png)