Kenwood TH-K40 Operation Manual - Page 66
TRANSCEIVER RESET, Key Operation, Menu Operation
View all Kenwood TH-K40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
TRANSCEIVER RESET There are 2 types of transceiver resets available: Partial Reset Use to initialize all settings other than the Memory channels and DTMF memory channels. Full Reset Use to initialize all transceiver settings that you have customized. There are 2 ways to perform a reset on the transceiver: by key operation and by accessing Menu mode. Key Operation 1 Turn the transceiver power OFF. 2 Press [F] + Power ON. • All indicators are lit. 3 Release [F]. 4 Rotate the ENC control and select your desired reset type: "PA.RST" (Partial Reset) or "FL.RST" (Full Reset). 5 Press [F]. • "SURE ?" appears. 6 Press [F] again to reset the transceiver. Note: When the lock function is on, you cannot reset the transceiver using Key operation. Menu Operation 1 Enter Menu mode and access Menu No. 99 (RESET), then press [F]. 2 Rotate the ENC control and select your desired reset type: "PART" (Partial Reset) or "FULL" (Full Reset). 3 Press [F]. • "SURE ?" appears. 4 Press [F] again to reset the transceiver. 58