Kenwood TH-K40 Operation Manual - Page 40
SELECTING AN OFFSET FREQUENCY, TONE FUNCTION, Activating the Tone Function
View all Kenwood TH-K40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
SELECTING AN OFFSET FREQUENCY To access a repeater which requires an odd-split frequency pair, change the offset frequency from the default which is used by most repeaters. 1 Enter Menu mode and access Menu No. 7 (OFFSET). 2 Rotate the ENC control to select the appropriate offset frequency value. • The selectable range is from 0.000 MHz to 29.950 MHz, in steps of 50 kHz. 3 Press [MENU] or [PTT] to exit Menu mode. Note: After changing the offset frequency, the new offset frequency will also be used by Automatic Repeater Offset. TONE FUNCTION Activating the Tone Function To turn the Tone function on: 1 Press [TONE] to turn the Tone function On. • Each time you press [TONE], the selection changes as follows: Tone ( ) ➡ CTCSS ( ) ➡ DCS ( ) ➡ Cross Tone ( ) ➡ Off (no display). • The " " icon appears on the display when the tone function is On. 2 Press [T.SEL]. • The current Tone frequency appears on the display and blinks. 3 Rotate the ENC control to select your desired frequency. • To exit the tone frequency selection, press [PTT]. 4 Press any key other than [MONI], [LAMP], or [PTT] to set the selected frequency. Note: If you have set up a Memory channel with a tone setting, simply recall the Memory channel instead of setting up the tone frequency every time. 32