Kenwood TH-K40 Operation Manual - Page 2
Thank You, Market Type Codes, Writing Conventions Followed In This Manual
View all Kenwood TH-K40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Thank You We are grateful you decided to purchase this KENWOOD FM transceiver. KENWOOD always provides Amateur Radio products which surprise and excite serious hobbyists. This transceiver is no exception. KENWOOD believes that this product will satisfy your requirements for voice communication. MARKET TYPE CODEs K: The Americas E: Europe M: General The market type code is printed on the bar-code label of the carton box. Writing Conventions Followed in this Manual The writing conventions described below have been followed to simplify instructions and avoid unnecessary repetition. Instruction Press [KEY]. Press [KEY] (1s). Press [KEY1], [KEY2]. Press [F] - [KEY]. Press [KEY] + Power ON. Action Momentarily press KEY. Press and hold KEY for 1 second or longer. Press KEY1 momentarily, release KEY1, then press KEY2. Press the F key to enter Function mode, then press KEY to access its secondary function. With the transceiver power OFF, press and hold KEY while turning the transceiver power ON. Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for countries that have adopted separate waste collection systems) Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items and their waste byproducts. Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and waste disposal will help conserve resources whilst preventing detrimental effects on our health and the environment. Notice: The sign "Pb" below the symbol for batteries indicates that this battery contains lead. Firmware Copyrights The title to and ownership of copyrights for firmware embedded in KENWOOD product memories are reserved for JVCKENWOOD Corporation. WHEN CONDENSATION OCCURS INSIDE THE TRANSCEIVER Condensation may occur inside the transceiver in such a case where the room is warmed using a heater on cold days or where the transceiver is quickly moved from a cold room to a warm room. When condensation occurs, the microcomputer and/or the transmit/receive circuits may become unstable, resulting in transceiver malfunction. If this happens, turn OFF the transceiver and just wait for a while. When the condensation droplets disappear, the transceiver will function normally.