Kenwood TH-K2ET User Manual - Page 70
Enabling a Weather Alert
![]() |
View all Kenwood TH-K2ET manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Note: x When you perform Full Reset {page 111}, the Weather Radio frequency recovers the factory default frequency (162.550 MHz). x When you clear the Weather Radio channel {page 47}, the factory default frequency (162.550 MHz) will not be recovered. x You can also transfer the AL memory channel data to the VFO or another memory channel. Enabling a Weather Alert You can monitor the Weather Radio frequency continuously or in the background while receiving on another frequency. To monitor the Weather Radio frequency continuously: 1 Press [MENU]. 2 Turn the Tuning control to select Menu No. 37 (WXA). 3 Press [MENU] and turn the Tuning control to select "ON". 4 Press [MENU] to store the setting. • The frequency automatically changes to the Weather Radio frequency. • "WX" appears on the LCD and the transceiver mutes. • The Tone, CTCSS and DCS functions cannot be configured to the AL channel. • When the Weather Alert tone is broadcasted, a morse code "WX" sounds from speaker and the transceiver unmutes. 5 To exit the Weather Alert mode, press [MENU], select Menu No. 37 (WXA), and set it to "OFF". 56
![](/manual_guide/products/kenwood-thk2at-user-manual-0914acb/70.png)