Kenwood TH-K2ET User Manual - Page 125
Initial Settings, Full Reset, VFO Reset
View all Kenwood TH-K2ET manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
MICROPROCESSOR RESET If your transceiver seems to be malfunctioning, resetting the microprocessor may solve the problem. The following 2 reset Modes are available. When performing the reset, you may lose memory data and stored information. Back up or write down important data before performing the reset. Initial Settings The factory defaults for the operating frequencies are as follows: • TH-K2AT/ E/ ET: 144.000 MHz • TH-K4AT/ E: 430.000 MHz The Memory channels have no data stored. The Weather Radio frequency (AL channel) is restored as 162.550 MHz (TH-K2AT K/ K2 only). Refer to pages 53, 55 and 87 for the Call Channel, Weather Radio frequency and frequency step size default values. Full Reset This resets all transceiver parameters to the factory default values. VFO Reset This resets the transceiver parameters excluding the stored DTMF Number in Memory {page 77} and memory channel contents. Note: While transceiver is operating in the Channel Display Mode {page 57}, you cannot reset the transceiver. 111