Kenwood TH-255A User Manual - Page 74
Using the Emergency Siren
View all Kenwood TH-255A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
■ Using the Emergency Siren 1 Press [0] (1.5s), to turn the Emergency siren ON. • "EMG" appears. 2 Press [0] (1.5s), [PTT] or power OFF, to turn the Emergency siren OFF. • When the Emergency siren sounds, press [PTT] to turn it OFF. • While the Emergency siren is sounding and a signal is being received (as shown by the signal meter), you will be unable to hear the signal from the speaker. • The Emergency siren will continue to sound until it has been turned OFF. When using an earphone or headset, do not turn the Emergency Siren function ON. Minimum/ Maximum Volume The transceiver retains the same volume level when the Volume control is turned to the lowest limit. Maximum Volume level allows you to limit the volume level to be no higher than the configured level even if a user attempts to increase the volume level. 1 Enter Menu mode and access Menu No. 9 (VOLUME). 2 Press [MENU], then rotate the Selector (or press [UP]/ [DOWN]) to select the minimum volume level (0 - 31). 66