Kenwood TH-255A User Manual - Page 31
MENU], Selector, DOWN]
![]() |
View all Kenwood TH-255A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Automatic Repeater Offset (K type only) This function automatically selects an offset direction, according to the frequency on the 2 m band. The transceiver is programmed for offset directions as shown below. To obtain an up-to-date band plan for repeater offset direction, contact your national Amateur Radio association. 1 Enter Menu mode and access Menu No. 25 (ARO). 2 Press [MENU], then rotate the Selector (or press [UP]/ [DOWN]) to select "ON". 3 Press [MENU] to store the setting. • You will be transmitting on an offset frequency value determined from your offset setting value {page 20} and an offset direction depending on your selected frequency. Refer to the settings below for offset directions: 4 Press any key other than [MON], [UP]/ [DOWN] or [ ] to exit Menu mode. Under 145.100 MHz: No offset (Simplex operation) 145.100 ~ 145.499 MHz: Minus (-) offset 145.500 ~ 145.999 MHz: No offset (Simplex operation) 146.000 ~ 146.399 MHz: Plus (+) offset 146.400 ~ 146.599 MHz: No offset (Simplex operation) 146.600 ~ 146.999 MHz: Minus (-) offset 147.000 ~ 147.399 MHz: Plus (+) offset 147.400 ~ 147.599 MHz: No offset (Simplex operation) 147.600 ~ 147.999 MHz: Minus (-) offset 148.000 MHz and higher: No offset (Simplex operation) 23
![](/manual_guide/products/kenwood-th255a-user-manual-2f480df/31.png)