Kenwood TH-255A User Manual - Page 10
Nstalling, Ptional, Attery
![]() |
View all Kenwood TH-255A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Installing the Optional PB-43N Ni-MH Battery Pack Note: The battery pack is not charged at the factory, you must charge the battery pack before using it with the transceiver. 1 Unlock (open) the safety catch located at the bottom of the battery pack. 2 Match the guides of the battery pack with the corresponding grooves on the upper rear of the transceiver, then firmly press the battery case to lock it in place. 3 Flip the safety catch into place to prevent accidentally pressing the release latch and removing the battery pack. 4 To remove the battery pack, lift the safety catch, then press the release latch to unlock the battery pack. Lift the battery pack away from the transceiver.
![](/manual_guide/products/kenwood-th255a-user-manual-2f480df/10.png)
2
I
NSTALLING
THE
O
PTIONAL
PB-43N N
I
-MH B
ATTERY
P
ACK
Note:
The battery pack is not charged at the factory, you must charge
the battery pack before using it with the transceiver.
1
Unlock (open) the safety catch located at the bottom of the
battery pack.
2
Match the guides of the battery pack with the corresponding
grooves on the upper rear of the transceiver, then firmly press
the battery case to lock it in place.
3
Flip the safety catch into place to prevent accidentally pressing
the release latch and removing the battery pack.
4
To remove the battery pack, lift the safety catch, then press the
release latch to unlock the battery pack.
Lift the battery pack
away from the transceiver.