Kenwood NX-330EX Operation Manual - Page 31

A maximum of 15 received messages can be stored in the stack memory of your transceiver. ■ Transmitting 1 Select your desired zone and channel. 2 Press the key programmed as [Status] to enter Status mode (proceed to step 5) or [Selcall + Status] to enter Selcall mode (proceed to step 3). 3 Press / to select the station you want to call. • You can enter a station ID by using the Keypad, or by using / . 4 Press to enter Status mode. 5 Press / to select the status you want to transmit. • You can enter a status ID by using the Keypad, or by using / (refer to step 3, above). 6 Press the key programmed as [Call 1] to [Call 6] to initiate the call. ■ Receiving A calling ID or text message will appear when a Status call is received. Press any key to return to normal operation. ■ Reviewing Messages in the Stack Memory 1 Press the key programmed as [Stack] to enter Stack mode. • The last received message is displayed. 2 Press / to select the desired message. • Press and hold for 1 second or press display information as follows: Selcall Name > Status Name > CH/GID to cycle the 3 Press to return to normal operation. • To delete the selected message, press or . To confirm the deletion, press or . • To delete all messages, press and hold or for 1 second. To confirm the deletion, press or . 21