Kenwood NX-330EX Operation Manual - Page 30

5-TONE SIGNALING 5-tone Signaling is enabled or disabled by your dealer. This function opens the squelch only when the transceiver receives the 5 tones programmed in your transceiver. Transceivers that do not transmit the correct tones will not be heard. SELCALL (SELECTIVE CALLING) A Selcall is a voice call to a station or group of stations. ■ Transmitting 1 Select your desired zone and channel. 2 Press the key programmed as [Selcall], [Selcall + Status] or [Selcall + SDM] to enter Selcall mode. 3 Press / to select the station you want to call. • You can directly enter the station ID. 4 Press the key programmed as [Call 1] to [Call 6] and begin your conversation. Note: Additionally, you can also use the keys programmed as [Digit 1x Down], [Digit 1x Up], [Digit 10x Down], and [Digit 10x Up] keys to adjust the Selcall number. [Digit 1x Up/Down] increases/ decreases the Selcall number by 1 each time the key is pressed. [Digit 10x Up/Down] increases/decreases the Selcall number by 10 each time the key is pressed. ■ Receiving When you receive a call containing the correct tones, the transceiver will enter Selcall mode. An alert tone will sound and the calling station's ID appear on the display. Press any key to return to normal operation. STATUS MESSAGE You can send and receive Status messages which may be decided in your talk group. Messages can contain up to 16 alphanumeric characters. 20