Kenwood KRF-V6300D User Manual - Page 27
Playback, Monitoring the input source in, the original sound STRAIGHT, DECODE
View all Kenwood KRF-V6300D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Playback VOLUME CONTROL INPUT SELECTOR AV AUX Monitoring the input source in the original sound (STRAIGHT DECODE) The signal input from a source can be output directly without any sound field effect added to it. VOLUME /o Input source keys œ Select the source you want to play. Use the Input source keys on the remote control unit to select a source. Or use [INPUT SELECTOR] knob or [AV AUX] key. ∑ Start playback from the selected source. é Use [VOLUME %/fi] to adjust the volume. ® Enjoy various surround effects. You can enjoy a variety of listen modes ( ª). The surround effects can be fine tuned according to the selected input source ( ,). • The AV AUX cannot be selected with the [INPUT SELECTOR] knob of this unit. This input should be selected using the [AV AUX] on this unit or the [AV AUX] key on the remote control unit. STRAIGHT DECODE œ Select the source you want to play. ∑ Start playback from the selected source. é Press [STRAIGHT DECODE]. STRAIGT DECODE indicator lights up. When STRAIGHT DECODE is enabled, the listen mode is selected automatically according to the input signal. ( ª). To cancel Press [STRAIGHT DECODE] again. STRAIGHT DECODE is also canceled when the listen mode is changed. • When the input mode is "6CH INPT", the listen mode does not change. ( §) • If the input signal uses a number of channels larger than the number of speakers in use, the signals are distributed automatically according to the available speakers. 27 English