Kenmore 000/12 Operating Instructions - Page 5

PARTS & ASSEMBLY PARTS EXHAUST HOSES Hose Adapter Wl N DOW KIT Exhaust Hose - Window Kit Adaptor ASSEMBLY & INSTALLATION INSTALLATION When the unit is operating as an air conditioner or dehumidifier, the unit draws in flesh outdoor air and exhausts hot air out of the room to complete the air exchange. When the unit is operating in tan or heater modes, no outdoor air exchange takes place. The window kit and exhaust hose do not need to be installed when the unit is used as a fan or heater. NOTE: The supplied window kit can be installed in sliding windows and sliding glass doors up to 8 ft. long (approximate length). MOUNTING THE EXHAUST HOSES * Choose a suitable location, near a grounded electrical outlet and suitable window or door. Remove packaging and locate components. . Extend both ends of the exhaust hoses approximately 6 inches. . Screw the window kit adapter onto one end of the exhaust hose clockwise. Screw the hose adapter onto the other end of the exhaust hose clockwise. Repeat on the other exhaust hose. . Remove outlet covers flom the back of the unit by screwing them counter-cloclcwise, then lifting up. . Mount the exhaust hoses onto the back of the unit by locking the hose adapters into place.