Jenn-Air JUCFP242HX Owners Manual - Page 20
Product Data Sheets
View all Jenn-Air JUCFP242HX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
PRODUCT DATA SHEETS BASE GRILLE WATER FILTRATION SYSTEM MODEL WF-L200V CAPACITY 200 GALLONS (757 LITERS) MODEL WF-NL120V CAPACITY 120 GALLONS (454 LITERS) Tested and certified by NSF International against ANSI/NSF Standard 42 for the reduction of Chlorine, Taste and Odor, Particulate Class lll*; and against ANSI/NSF Standard 53 for the reduction of Lead, Mercury, Benzene, and p-dichlorobenzene. This system has been tested according to ANSI/NSF 42/53 for the reduction of the substances listed below. The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system, as specified in ANSI/NSF 42/53. Substance NSF Reduction Reduction Aesthetic Requirements Effects Average Influent Influent Challenge Concentration Maximum Effluent Average Effluent Minimum % Average % Reduction Reduction Chlorine Taste/Odor ≥50% Particulate Class III* ≥85% 1.9 mg/L 49,333/mL 2.0 mg/L ± 10% At least 10,000 particles/mL 0.07 mg/L 640 mg/L** 0.06 mg/L 312 mg/L >75.0% 98.7% >75.0% 99% Contaminant Reduction NSF Reduction Average Requirements Influent Influent Challenge Concentration Maximum Effluent Average Effluent Minimum % Average % Reduction Reduction Lead: @ pH 6.5 Lead: @ pH 8.5 0.01mg/L 0.01mg/L 0.14 mg/L*** 0.15 mg/L ± 10% 0.15 mg/L*** 0.15 mg/L ± 10% 0.0014 mg/L 0.0011 mg/L 0.0069 mg/L 0.0042 mg/L 99.0% 95.4% 99.21% 97.08% Mercury: @ pH 6.5 Mercury: @ pH 8.5 0.002 mg/L 0.002 mg/L 0.0059 mg/L 0.006 mg/L ± 10% 0.0009 mg/L 0.0004 mg/L 84.74% 0.0054 mg/L 0.006 mg/L ± 10% 0.0007 mg/L 0.00043 mg/L 87.03% 92.47% 91.93% Benzene 0.0050 mg/L 0.0157 mg/L 0.015 ± 10% 0.002 mg/L 0.00083 mg/L 87.26% 94.71% p-dichlorobenzene 0.075 mg/L 0.210 mg/L 0.225 ± 10% 0.0005 mg/L 0.0005 mg/L 99.76% 99.76% Test Parameters: pH = 7.5 ± 0.5 unless otherwise noted. Flow = 0.5 gpm (1.9 Lpm). Pressure = 60 psig (413.7 kPa). Temp. = 63°F (17.2°C). It is essential that operational, maintenance, and filterreplacement requirements be carried out for the product toperform as advertised. Model WF-L200V: The filter monitor system measures theamount of water that passes through the filter and alerts youto replace the filter. When 90% of the filter's rated life is used,the filter indicator light changes from green to yellow. When100% of the filter's rated life is used, the filter indicator lightchanges from yellow to red, and it is recommended that youreplace the filter. Use replacement cartridge L200V / NL120V,part #4396702. 2014 suggested retail price of $32.99 U.S.A. /$49.99 Canada. Prices are subject to change without notice. Model WF-NL120V: Change the water filter cartridge every6-9 months. Use replacement cartridge L200V / NL120V, part#4396702. 2014 suggested retail price of $32.99 U.S.A. /$49.99 Canada. Prices are subject to change without notice. Application Guidelines/Water Supply Parameters Water Supply City or Well Water Pressure 30 - 120 psi (207 - 827 kPa) Water Temperature 33° - 100°F (0.6° - 37.8° C) Service Flow Rate 0.5 GPM (1.89 L/min.) @ 60 psi. (413.7 kPa) The product is for cold water use only. Do not use with water that is microbiologically unsafe or ofunknown quality without adequate disinfection before or afterthe system. Refer to the front cover or "Accessories" section for theManufacturer's name, address and telephone number. Refer to the "Warranty" section for the Manufacturer's limitedwarranty. *Class III particle size: >5 to