Invacare TDXSP2X-MCG Owners Manual 2 - Page 15

Safety

WARNING!

Risk of Death or Serious Injury

Operating the wheelchair with the seat

tilted/reclined/back angle position beyond 30°

can cause instability resulting in death or serious

injury from the wheelchair tipping over.

– NEVER operate the wheelchair or elevate/lower

the seat while in any tilted/reclined/back

angle position over 30° relative to the vertical

position. If the drive lock-out does not stop

the wheelchair from operating or the seat from

elevating/lowering in a tilt/recline/back angle

position over 30° relative to vertical, DO NOT

operate the wheelchair or elevate/lower the

seat. DO NOT attempt to adjust the drive

lock-out. Have the wheelchair serviced by a

qualified technician.

– The wheelchair user MUST have a clear line of

sight to drive safely. On initial chair delivery

and after adjusting the back angle, drive

lock-out switch tilt system or recline system, tilt

and recline the seat back to the farthest driving

position IMMEDIATELY before drive lock-out

engages and ensure there is a clear line of

sight present in which to drive the wheelchair.

If a clear line of sight is not present, have the

back angle repositioned or readjust the lockout

angle such that safe driving with a clear line of

sight is achieved.

WARNING!

– Use only the controls listed in the remote

manual to activate the tilt functions. Specific

actuator controls are noted for each function

or combination throughout the remote manual.

DO NOT USE any other actuator controls. Such

devices may result in excess heating and cause

damage to the actuator and associated wiring

and could cause a fire, death, physical injury

or property damage. If such devices are used,

Invacare shall not be liable and the limited

warranty is void.

– Specific actuator controls are noted for each

function or combination throughout the remote

manual. Refer to the remote manual for proper

use.

– DO NOT operate tilt seat around children.

– ALWAYS keep hands and feet out from

underneath tilt seat - otherwise serious injury

may result.

– DO NOT tip the seating system/wheelchair

without assistance.

– DO NOT store items under seat.

– Cables must be routed and secured properly to

ensure that cables DO NOT become entangled

and damaged during normal operation of

seating system.

60101832-A

15

Section	Page
language dependent part	4
1 General	5
1.1 Introduction	5
1.2 Symbols	5
1.3 Prescription Statement	6
1.4 Indication for Use	6
1.5 Service Life	6
2 Safety	7
2.1 General Guidelines	7
2.1.1 Set Up	11
2.1.2 Safety Information on Using the Seating System	12
2.1.3 Repair or Service Information (Dealers and/or Qualified Technicians)	16
2.2 Safety and Handling	16
2.2.1 Stability and Balance	19
2.2.2 Footplates and Front Rigging	20
2.2.3 Reaching, Leaning and Bending—Forward	21
2.2.4 Reaching, Bending—Backward	21
2.2.5 Transferring To and From Other Seats	21
2.2.6 Pinch Points	22
2.2.7 Storage	24
2.2.8 Weight Training and Other Activities	24
3 Components	25
3.1 Labels on the Product	25
3.2 Power Positioning Functions	27
3.3 Safety Lockout and Limit Switches	28
4 Setup	31
4.1 Setup/Delivery Inspection	31
4.2 Adjusting Ultra Low Maxx Systems—General Information	31
4.3 Adjusting the Remote	32
4.3.1 Adjusting Remote Width	32
4.3.2 Swivelling the Remote to the Side	32
4.4 Adjusting the Quad Link Remote Support	33
4.4.1 Adjusting Remote Height	33
4.4.2 Adjusting Remote Position	33
4.4.3 Adjusting Lock Tension	33
4.4.4 Swivelling the Remote to the Side	34
4.5 Ultra Rail Mounted Maxx Cantilever Armrest	35
4.6 Dual Post Recline Armrest	36
4.7 Adjust Armpad with Multi Axis Upper Extremity Support (MACES)	37
4.8 The Elbow Block	37
4.9 The Hip Support	39
4.9.1 Hip Support with Quick Release	39
4.9.2 Fixed Hip Support	42
4.10 Lateral Trunk Support Adjustments	43
4.11 Adjusting the Headrest	45
4.11.1 Installing Headrest Adapter for Elite and High Backs	45
4.11.2 Adjusting Elan Headrest Hardware	46
4.11.3 Adjusting Multi-Axis Headrest Hardware	48
4.12 LNX Legrest	49
4.12.1 Setting the Length of the Legrest	49
4.12.2 Setting the Angle of the Footplate	50
4.12.3 Setting the Angle of the Foot Platform	50
4.12.4 Setting the Height and Width of the Calf Pad	50
4.13 Pivot Plus Legrests	51
4.13.1 Swing Away Pivot Plus Legrests	51
4.13.2 Removing Pivot Plus Legrests	52
4.13.3 Adjusting Angle of Pivot Plus Legrests	53
4.13.4 Adjusting Width- and Angle-Adjustable Footplate	53
4.14 Heavy Duty Legrests	54
4.14.1 Swing Away Heavy Duty Legrests	54
4.14.2 Removing Heavy Duty Legrests	55
4.14.3 Adjusting Width- and Angle-Adjustable Footplate	55
5 Usage	57
5.1 Rotating/Removing Recline Armrest	57
5.2 Rotating Cantilever armrest	57
5.3 Removing/Inserting Hip Support with Quick Release	59
5.4 Removing/Inserting Fixed Hip Support	59
6 Transport	60
6.1 Wheelchair Transport Brackets (TRBKTS)	60
6.2 Transport Ready Option (TRRO)	60
6.3 Transport—General information	61
6.4 Transferring Mobility Device to Vehicle	62
6.5 Use of the Mobility Device as a Seat in a Vehicle	62
6.5.1 How the Mobility Device is Anchored in a Vehicle	64
6.5.2 How The User is Secured Within the Mobility Device	65
6.6 Transporting the Mobility Device Without Occupant	67
7 Maintenance	68
7.1 Wear and Tear Information	68
7.2 User/Attendant Inspection Checklists	68
7.2.1 Inspect/Adjust Daily	69
7.2.2 Inspect/Adjust Weekly	69
7.2.3 Inspect/Adjust Monthly	69
7.2.4 Inspect/Adjust Periodically	69
7.3 Service Inspection	70
7.3.1 Six Month Inspection	70
7.4 Cleaning	71
8 Troubleshooting	73
8.1 Performance Troubleshooting	73
9 Technical data	76
9.1 Technical Specifications	76
10 Warranty	80
10.1 Limited Warranty—US	80
10.2 Limited Warranty—Canada	80
10.3 Repair or Replacement	80
10.4 Limitations and Exclusions	81

Invacare TDXSP2X-MCG Owners Manual 2 - Page 15

WARNING, Risk of Death or Serious Injury

Page 15 highlights