Invacare PTBASE Owners Manual - Page 68
Removing/Installing the Seat Pan
![]() |
View all Invacare PTBASE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
SECTION 9-SEAT Removing/Installing the Seat Pan NOTE: For this procedure, refer to FIGURE 9.3. Removing NOTE: If a seating system is being used on the wheelchair, refer to your particular seating system manufacturer's Owner's Manual for installation and removal of the seating system. 1. If so equipped, remove seating system from wheelchair. 2. Remove the four mounting screws that secure the seat pan to the seat rails. 3. Remove existing seat pan and discard. Installing 1. Position the new seat pan on crossmembers. 2. Secure with the existing four mounting screws. Securely tighten. 3. Reinstall seating system onto wheelchair. Rigid Seat Pan Mounting Screws Mounting Screws Crossmember Seat Frame Assembly FIGURE 9.3 Removing/Installing the Seat Pan Power Tiger™ 68 Part No 1134839
![](/manual_guide/products/invacare-ptorb-owners-manual-7f9e709/68.png)