Invacare PTBASE Owners Manual - Page 38
Installing/Removing T-Arms
![]() |
View all Invacare PTBASE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
SECTION 6-WHEELCHAIR OPERATION Installing/Removing T-Arms NOTE: For this procedure, refer to FIGURE 6.9 on page 38. Installing T-Arms 1. Position the T-arm over the T-arm socket on the wheelchair frame. NOTE: Make sure the locking lever is towards the front of the wheelchair. 2. Slide T-arm into T-arm socket until the locking lever is in the slot in the T-arm socket and an audible "click" is heard. 3. Pull up on T-arm to make sure T-arm is locked in place. NOTE: If the T-arm does not slide in the T-arm socket as desired, contact a qualified technician. 4. Adjust the T-arm for desired height. Refer to Adjusting T-Arm Height on page 39. NOTE: If width and/or depth adjustments are necessary, contact a qualified technician. 5. Repeat STEPS 1-4 for opposite side of wheelchair. Removing T-Arms 1. Press in on the locking lever and lift the T-arm straight up and out of the T-arm socket. NOTE: If the T-arm does not slide up and down in the T-arm socket as desired, contact a qualified technician. 2. Repeat STEP 1 for opposite side of the wheelchair. T-Arm Power Tiger™ Wheelchair Frame T-Arm Socket Locking Lever (Towards the front of the wheelchair) Slot FIGURE 6.9 Installing/Removing T-Arms 38 Part No 1134839
![](/manual_guide/products/invacare-ptorb-owners-manual-7f9e709/38.png)