Intermec 70 Intermec RFID Demo User Guide - Page 34

Chapter 2 - Write a Tag 6 Scan the tag: • Pull and hold the trigger (IP30) or the scan handle, or • Press and hold the Scan button. 7 View the results of the write. • If the write is successful, a table displays the data value and a "Write OK" message. • If the write is unsuccessful, a table displays the data value with an error. For a list of errors, see "About the Write Error Messages" on page 36. 8 (Optional) To verify that the tag was protected successfully: a Set the application to read the data you just protected. For help, see "Define a Data Field to Read" on page 8. b Read the tag. For help, see "Read a Single Tag" on page 11. c View the tag details field. For help, see "View Tag Field Details" on page 12. Unprotect a Tag If you have protected data in a tag, you can use the Intermec RFID Demo to unprotected an EPC value, user memory, access password, or kill password. You must first program and protect the access password in order to perform this procedure. To unprotect tag data 1 If you already launched the Intermec RFID Demo, continue with Step 2. If not, from the Start or Home screen, tap Intermec RFID Demo. 2 Tap Menu > Write. The Write Mode tab appears. 3 From the Program drop-down menu, select one of the following: • EPC • User memory • Access password • Kill password 4 From the drop-down menu, select Unprotect. 28 Intermec RFID Demo User Guide