Honeywell 4600RSF051CE User Guide - Page 59
Illumination Lights
![]() |
View all Honeywell 4600RSF051CE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
If you have an aimer delay programmed (see Aimer Delay on page 3-12), the aimer will be at 100% power during the delay, regardless of the LED Power Level. Note: If you scan the Off barcode, both the aimer and illumination lights turn off, making it impossible to scan barcodes in low light. To turn the LED Power Level back on, move to a brightly lit area and scan either the Low or the High barcode below. Off Low (50%) * High (100%) Illumination Lights If you want the illumination lights on while reading a barcode, scan the Lights On barcode, below. However, if you want to turn just the lights off, scan the Lights Off barcode. Default = Lights On. Note: This setting does not affect the aimer light. The aiming light can be set using Aimer Mode (page 3-13). * Lights On Lights Off 3 - 11
![](/manual_guide/products/honeywell-4600rsf051ce-user-guide-cd48244/59.png)