Honeywell 4600GSF051C-0F00E User Manual - Page 68
Multiple Symbols, No Read
View all Honeywell 4600GSF051C-0F00E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Multiple Symbols Note: This feature does not work when the Imager is in Low Power mode. When this programming selection is turned On, it allows you to read multiple symbols with a single pull of the Imager's trigger. If you press and hold the trigger, aiming the Imager at a series of symbols, it reads unique symbols once, beeping (if turned on) for each read. The imager attempts to find and decode new symbols as long as the trigger is pulled. When this programming selection is turned Off, the Imager will only read the symbol closest to the aiming beam. On * Off No Read With No Read turned On, the Imager notifies you if a code cannot be read. If using a Quick*View Scan Data Window, an "NR" appears when a code cannot be read. If No Read is turned Off, the "NR" will not appear. On * Off If you want a different notation than "NR," for example, "Error," or "Bad Code," you can edit the output message using the Data Formatter (page 5-5). The hex code for the No Read symbol is 9C. 3 - 20 4600rp, 4600g/4600r, 4800i User's Guide