Hitachi T7K250 Specifications - Page 206
POR. When B=0, MAX LBA/CYL which is set by Set Max LBA/CYL command will
UPC - 000062373678
View all Hitachi T7K250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 206 highlights
If a host protected area has been established by a Set Max Address Ext command, the device shall return command aborted. Output parameters to the device B Option bit for selection whether nonvolatile or volatile. B = 0 is volatile condition. When B=1, MAX LBA/CYL which is set by Set Max LBA/CYL command is preserved by POR. When B=0, MAX LBA/CYL which is set by Set Max LBA/CYL command will be lost by POR. B = 1 is not valid when the device is in Address Offset mode. Sector Number In LBA mode this register contains LBA bits 0 - 7 which is to be set. (L=1) In CHS mode this register is ignored. (L=0) Cylinder High/Low In LBA mode this register contains LBA bits 8 - 15 (Low), 16 - 23 (High) which is to be set. (L=1) In CHS mode this register contains cylinder number which is to be set. (L=0) H In LBA mode this register contains LBA bits 24 - 27 which is to be set. (L=1) In CHS mode this register is ignored. (L=0) Input parameters from the device Sector Number In LBA mode this register contains max LBA bits 0 - 7 which is set. (L=1) In CHS mode this register contains max sector number. (L=0) Cylinder High/Low In LBA mode this register contains max LBA bits 8 - 15 (Low), 16 - 23 (High) which is set. (L=1) In CHS mode this register contains max cylinder number which is set. (L=0) H In LBA mode this register contains max LBA bits 24 - 27 which is set. (L=1) In CHS mode this register contains max head number. (L=0) Deskstar T7K250 Hard Disk Drive Specification 192