Hitachi CP-X3014WN User Manual - Page 65
Description, WIRELESS, SETUP, continued, DATE AND, 1.8 Date/Time, Settings, Network Guide,
![]() |
View all Hitachi CP-X3014WN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
NETWORK menu Item WIRELESS SETUP (continued) DATE AND TIME CH Description Use the buttons to enter the Year (last two digits), Month, Date, Hour and Minute. • When this item is set, the same item in the WIRED SETUP menu is overwritten with the same setting ( 69). • The projector will override this setting and retrieve DATE AND TIME information from the Time server when SNTP is enabled. ( 3.1.8 Date/Time Settings in the Network Guide) • This setting will be reset if the projector is turned off while STANDBY MODE in the SETUP menu is set to SAVING ( 44), or when the AC power is turned off. Use the ▲/▼ buttons to select the channel of the wireless LAN to be used while MODE ( 63) is set to ADHOC. Select according to the settings of your computer. The channels 1 to 11 are available. To save the setting, press the ► button. • The available channels would be various depending on a country. In addition, wireless network card might be required due to the standard. • This item can only be selected when MODE is set to ADHOC. When MODE is set to INFRASTRUCTURE, the channel is automatically selected. Use the ▲/▼ buttons to select the encryption method to be used. WPA2-PSK(AES) WPA2-PSK(TKIP) OFF WPA-PSK(AES) ENCRYPTION WEP 64bit WEP 128bit WPA-PSK(TKIP) To save the setting, press the ► button. • When MODE ( 63) is set to ADHOC, either WPA-PSK and WPA2-PSK cannot be selected. • If IEEE802.11 n is used while MODE is set to INFRASTRUCTURE, TKIP and WEP are disabled. If OFF or AES is not selected, communication will switch automatically to IEEE802.11 b/g. (continued on next page) 65
![](/manual_guide/products/hitachi-cpx3014wn-user-manual-00001f8/65.png)