Hitachi CP-X3014WN User Manual - Page 64
Description, WIRELESS, SETUP, continued, Dynamic Host, Configuration, Protocol, IP ADDRESS, SUBNET,
![]() |
View all Hitachi CP-X3014WN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
NETWORK menu Item WIRELESS SETUP (continued) Description Use the ▲/▼ buttons to turn DHCP on/off. ON OFF Select OFF when the network does not have DHCP DHCP enabled. To save the setting, press the ► button. (Dynamic Host Configuration Protocol) • When the "DHCP" setting changes to "ON", it takes a little time to obtain IP address from DHCP server. • Auto IP function will be assigned an IP address if the projector could not obtain an IP address from server even if DHCP is "ON" IP ADDRESS Use the buttons to enter the IP ADDRESS. This function can only be used when DHCP is set to OFF. • The IP ADDRESS is the number that identifies this projector on the network. You cannot have two devices with the same IP ADDRESS on the same network. • The IP ADDRESS "0.0.0.0" is prohibited. SUBNET MASK Use the buttons to enter the same SUBNET MASK used by your computer. This function can only be used when DHCP is set to OFF. • The SUBNET MASK "0.0.0.0" is prohibited. DEFAULT GATEWAY Use the buttons to enter the DEFAULT GATEWAY (a node on a computer network that serves as an access point to another network) address. This function can only be used when DHCP is set to OFF. DNS SERVER Use the buttons to input the DNS server address. The DNS server is a system to control domain names and IP addresses on the Network. TIME DIFFERENCE Use the ▲/▼ buttons to enter the TIME DIFFERENCE. Set the same TIME DIFFERENCE as the one set on your computer. If unsure, consult your IT manager. Use the ► button to return to the menu after setting the TIME DIFFERENCE. • When this item is set, the same item in the WIRED SETUP menu is overwritten with the same setting ( 69). (continued on next page) 64
![](/manual_guide/products/hitachi-cpx3014wn-user-manual-00001f8/64.png)