HP Q3726A HP LaserJet 9040mfp/9050mfp - User Guide - Page 153
LDAP Gateway
View all HP Q3726A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
Message Explanation or recommended action Gateways failed The MFP was unable to locate either an SMTP or LDAP server. Verify the gateway address. HP Digital Sending: Delivery Error A digital send job has failed and cannot be delivered. Try to send the job again. INCORRECT The wrong PIN was typed. Return to the previous screen and type the PIN again. Initializing... The MFP is starting up. INSERT OR CLOSE TRAY xx The specified tray must be inserted or closed for printing to continue. INSTALL CARTRIDGE The print cartridge has been removed or has been installed incorrectly. It must be replaced or reinstalled correctly for printing to continue. INSUFFICIENT MEMORY TO LOAD FONTS/DATA To continue touch OK The MFP does not have enough memory to load the data (for example, fonts or macros) from the location specified. Touch OK to continue without this information. If the message persists, add more memory. INTERNAL DISK NOT FUNCTIONAL The internal hard disk has failed. Turn the MFP off, and then turn the MFP on. If the message persists, see the HP support flyer or go to www.hp.com/support/ lj9040mfp or www.hp.com/support/lj9050mfp. LDAP Gateway Not The LDAP server is not communicating with the MFP. Verify the LDAP server Responding address. Contact the network administrator. LDAP Gateway OK The LDAP server has responded after exceeding the time out value for an address request. LDAP Server is not responding Contact administrator The LDAP server has exceeded the time out value for an address request. Verify LDAP server address. LOAD TRAY xx To use another tray touch OK. The job requires a specific media type and size that is not available. Load the requested media into Tray 1. Touch OK to use a media type and size that is available in another tray, or follow the instructions in the on screen dialog box. LOAD TRAY 1 [TYPE][SIZE] The tray is empty or configured for a different size than the size requested. Follow the instructions on the pop-up dialog box. ENWW Understanding MFP messages 149