HP Color LaserJet CM6030/CM6040 HP Color LaserJet CM6040/CM6030 MFP - Fax Guid - Page 20
Set redial-on-no-answer, Set redial interval, Administration, Initial Setup, Fax Setup
View all HP Color LaserJet CM6030/CM6040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Set the redial-on-busy setting 1. On the control panel, scroll to and touch the Administration icon to open the Administration menu. 2. Scroll to touch Initial Setup. 3. Scroll to touch Fax Setup. 4. Touch Fax Send Settings and use the down arrow key to scroll to Redial on Busy. 5. Touch the text box to display the keyboard. 6. Enter the value (0-9) and touch OK. 7. Touch Save. Set redial-on-no-answer The redial-on-no-answer setting selects the number of times the fax accessory redials if the number dialed does not answer. The number of retries is either 0 to 1 (used in the U.S.) or 0 to 2, depending on the country/region setting. The interval between retries is set by the redial interval setting. Set the redial-on-busy setting 1. On the control panel, scroll to and touch the Administration icon to open the Administration menu. 2. Scroll to touch Initial Setup to open the initial setup menu. 3. Scroll to touch Fax Setup to open the fax setup menu. 4. Touch Fax Send Settings and use the down arrow key to scroll to Redial on No Answer. 5. Touch Never or Once. 6. Touch Save. Set redial interval The redial interval setting selects the number of minutes between retries if the number dialed is busy or not answering. NOTE: You might observe a redial message on the control panel when both the Redial-on-Busy and Redial-on-No-Answer settings are set to off. This occurs when the fax accessory dials a number, establishes a connection, and then loses the connection. As a result of this error condition, the fax accessory performs two automatic redial attempts regardless of the redial settings (the first one at 26,400 bps and, if that fails, a second one at 14,400 bps). During this redial operation, a message appears on the control panel to indicate that a redial is in progress. Set the redial interval 1. On the control panel, scroll to and touch the Administration icon to open the Administration menu. 2. Scroll to touch Initial Setup to open the initial setup menu. 3. Touch Fax Setup to open the fax setup menu. 4. Touch Fax Send Settings and use the down arrow key to scroll to Redial Interval. 5. Touch the text box to display the keyboard. 12 Chapter 2 Set fax settings ENWW