Gateway NV-53 Service Guide - Page 67
Secure the new multimedia board, with the connector facing up, on
View all Gateway NV-53 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
www.gateway.com 5 Secure the new multimedia board, with the connector facing up, on the keyboard cover. 6 Insert the multimedia cable to its connector on the multimedia board, then close the clip to lock the cable in place. 7 Insert the tabs on the front side of the keyboard cover into the slots located on the top corners of the palm rest assembly, then press down on the back part. 8 Press down on the cover until it clicks in place. The keyboard cover is correctly mounted when you can run you finger along the sides of the cover and find no gaps. 9 Close the LCD panel and turn the notebook over so the base is facing up. 10 Secure the keyboard cover with the screws removed in step 3 of the "Replacing the keyboard cover" procedure on page 58. Caution If the cover is not correctly installed, your notebook could be damaged when you try to close the LCD panel. 11 Reinstall the battery. 61