Gateway NV-53 Service Guide - Page 61
Slide the new hard drive into the hard drive compartment and make sure
View all Gateway NV-53 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
www.gateway.com 5 If your new hard drive already includes the hard drive bracket, go to step 8. If you need to use the bracket from the old hard drive, go to step 6. 6 Remove the screws that secure the hard drive bracket, and then detach the bracket from the drive. 7 Place the bracket on the new drive and secure it with the two screws removed in step 6. 8 Slide the new hard drive into the hard drive compartment and make sure it's properly engaged to the SATA1 connector. 9 Secure the new drive to the system board with the screw removed in step 6. 10 Reinstall the bay cover. 55
www.gateway.com
55
5
If your new hard drive already includes the hard drive bracket, go to
step 8
.
If you need to use the bracket from the old hard drive, go to
step 6
.
6
Remove the screws that secure the hard drive bracket, and then detach the
bracket from the drive.
7
Place the bracket on the new drive and secure it with the two screws removed
in
step 6
.
8
Slide the new hard drive into the hard drive compartment and make sure
it’s properly engaged to the SATA1 connector.
9
Secure the new drive to the system board with the screw removed in
step 6
.
10
Reinstall the bay cover.