Gastroback 40898 User Manual - Page 9

Technical Specifications, Before First Use - vital

Page 9 highlights

the motor block or underneath it to avoid electric shock. There are louvre underneath the motor block. Ensure that no water can run into the louvre. When liquids are spilled on the motor housing, immediately unplug the appliance and dry the motor housing to avoid risk of electric shock or fire. Do not attempt to operate the appliance, when liquids are on or in the motor housing. Technical specifications Model: Power supply: Power consumption: Length of power cord: Revolutions: Weight: Dimensions: Certification: Art.-No. 40898 Vital Mixer Basic 220 - 240V W, 50 Hz 600 W ca. 105 cm 18,000 - 21,000 RPM ca. 3.4 kg ca. 190 x 195 x 415 mm (W x D x H) before first use All parts of the mixer are to be thoroughly cleaned before being used for the first time. (see Section: ›Care and Cleaning‹). Take out the required length of cable from the cable tidy on the base of the mixer and connect the device to the mains supply. Assembling the Glass Jug 1. Place the gasket over the kniveshaft. 2. Place the kniveshaft with the gasket into the mount. 3. Insert the mount into the base of the glass jug. barlot / beaker lid 1,5 l glass jug gasket knives/kniveshaft mount 25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16

the motor block or underneath it to avoid electric shock. There are louvre underneath the motor
block. Ensure that no water can run into the louvre. When liquids are spilled on the motor hous-
ing, immediately unplug the appliance and dry the motor housing to avoid risk of electric shock
or fire.
Do not
attempt to operate the appliance, when liquids are on or in the motor housing.
TECHNICAL SPECIFICATIONS
Model:
Art.-No. 40898 Vital Mixer Basic
Power supply:
220 – 240 V W, 50 Hz
Power consumption:
600 W
Length of power cord:
ca. 105 cm
Revolutions:
18,000 - 21,000 RPM
Weight:
ca. 3.4 kg
Dimensions:
ca. 190 x 195 x 415 mm (W x D x H)
Certification:
BEFORE FIRST USE
All parts of the mixer are to be thoroughly cleaned before being used for the first time. (see
Section: ›Care and Cleaning‹). Take out the required length of cable from the cable tidy on
the base of the mixer and connect the device to the mains supply.
Assembling the Glass Jug
1.
Place the gasket over the kniveshaft.
2.
Place the kniveshaft with the gasket into the mount.
3.
Insert the mount into the base of the glass jug.
25
barlot / beaker
mount
knives/kniveshaft
gasket
1,5 l glass jug
lid