Gastroback 40898 User Manual - Page 11

Selecting the Speed Levels Turn the ON/OFF-switch easily to the desired speed level. The appropriate speed level is determined by the textures of the ingredients. To use the pulse function (ON/OFF-switch position ›P‹) press and hold the switch in position until the ingredients have reached the desired consistency. Working with the Vital Mixer Basic WARNING: Always remove the glass jug from the motor base before opening the lid or checking the contents. 1. Place the ingredients in the glass jug. Important: Pre-cooked ingredients should cool down before processing. If possible fill in the liquid ingredients first. Cut solid ingredients before placing into the glass jug into 2 cm pieces. Do not fill the glass jar too full. Otherwise, the content may overflow or spray out and the engine could get stuck. 2. Place the lid on the glass jar and press down firmly. Close the central opening of the lid with the transparent beaker. The has beaker two small guide pins that fit into the slots on the cover on both sides. Slide the beaker into the lid all the way down and turn it clockwise to lock. WARNING: While the appliance is operating never remove the glass jug, remove the lid or insert wooden spoon or other foreign objects into the glass jug. Be sure to turn ON/ OFF-switch to position ›0‹ to turn off the appliance and wait until the motor has come to a complete stop. Then take down the glass jug from the motor base, before reaching into the glass jug or work with cooking utensils and similar objects in the glass jug. WARNING: If you process hot ingredients, please make sure not to burn yourself on the glass jar or lid, or scald on steam or spraying liquids. Place perhaps a kitchen towel over the lid to protect from splashes and steam. 3. Keep one hand on the lid and turn the appliance on using the ON/OFF-switch. Be sure to select the desired speed level. The motor starts to work. ATTENTION: If the motor ceases to operate unintentionally or is unusually slow, immediately turn the ON/OFF-switch to position ›0‹. Otherwise, the motor may overheat. Pay attention to the section ›Trouble Shooting‹. Note: If you have pressed the pulse button or the ice-crushing button, the motor runs as long as you hold the switch. 4. After a few seconds turn the ON/OFF-switch to position ›0‹ (OFF) to turn off the appliance. 5. Once the blades have come to a stop, grasp the glass jug by the handle and remove the jug from the motor base. Afterwards you can remove the lid to check the product or push solid or viscous ingredients with a wooden or plastic spoon down gently. If you wish to add other ingredients, use the beaker from the lid. To do this, turn the beaker first anti-clock-wise and then pull it up and out. Put the ingredients through the resulting hole and put the beaker afterwards back on. You may possibly want to run the appliance once more for a few seconds until the product has the desired texture. Return the glass jug onto the motor base. You can then turn on the appliance again. 27