Fujitsu MPB3043AT Product Manual - Page 21
Table 1.3, Current and power dissipation
![]() |
View all Fujitsu MPB3043AT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Mode of Operation Model Spin up Idle (Ready) (*3) R/W (On Track) (*4) Seek (Random) (*5) Standby Sleep Table 1.3 Current and power dissipation Typical RMS current (*1) [mA] +12 V +5 V MPB 3021AT MPB 3032AT MPB 3043AT MPB 3052AT MPB 3064AT All Models 1300 1500 peak 460 600 peak 115 140 185 460 Typical Power (*2) [watts] MPB 3021AT 3.68 MPB 3032AT MPB 3043AT 17.9 3.98 MPB 3052AT MPB 3064AT 4.52 125 150 200 510 4.05 4.35 4.95 335 360 410 510 6.57 6.87 7.47 4 155 0.82 4 110 0.60 *1 Current is typical rms except for spin up. *2 Power requirements reflect nominal values for +12V and +5V power. *3 Idle mode is in effect when the drive is not reading, writing, seeking, or executing any commands. A portion of the R/W circuitry is powered down, the spindle motor is up to speed and the Drive ready condition exists. *4 R/W mode is defined as 50% read operations and 50% write operations on a single physical track. *5 Seek mode is defined as continuous random seek operations with minimum controller delay. 1 - 6 C141-E045-02EN
![](/manual_guide/products/fujitsu-mpb3043at-product-manual-2b6d9c3/21.png)