Frigidaire FHPH142AC1 Complete Owners Guide - Page 19

19 OPERATING INSTRUCTIONS cooling only models), or fan only operation depending on what temperature you have selected and the room temperature. The air conditioner will control room temperature automatically round the temperature point set by you. Note: In this mode, fan speed cannot be selected. Louver Swing Function Press the "swing" button to enable louver swing function, and the upper side of screen will display " ". The louver on the top panel will swing up and down. Press this button again to disable the louver swing function. Sleep mode When the unit is in Cool, Heat or Auto mode, you can press the "sleep" button to make the unit run in Sleep mode. In this mode, the fan speed will be set as "Auto" automatically, which cannot be changed. In Cool/Heat mode the selected temperature will increase/decrease by 2 °F 30 minutes after the mode is selected. The temperature will then increase/decrease by another 2 °F after an additional 30 minutes. This new temperature will be maintained for 7 hours before it returns to the originally selected temperature. This ends the "Sleep" mode and the unit will continue to operate as originally programmed. The "Sleep" mode program can be cancelled at any time during operation by pressing the "Sleep", "mode", "fan speed" or "on·o " button. Note: In Fan or Dry mode, Sleep mode cannot be set. °F/°C function Press the " " and " " button at the same time for more than 3 seconds to switch between degrees Fahrenheit and degrees Celsius. Note: In Dry/Fan mode, you cannot select °F/°C.