Foxconn A78AX-K English manual. - Page 42
IDE Configuration
View all Foxconn A78AX-K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
IDE Configuration CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc. IDE Configuration ��ID��E���C��o�n��fi�g�u��r�a�t�i�o�n� Help Item OnBoard PCI IDE Controller [Both] Disabled: Disable the �O�n�C�h�ip�S��AT�A��C�h�a�nn�e�l E�n�a�bl�e�d I �in�te�g�ra�t�e�d�ID�E��� �O�n�C�h�ip�S�A�T�A�T�y�p�e N�a�tiv�e�I�D�E c�o�nt�ro�ll�e�r. �S�A�T�A�ID��E�C�o�m�b�i�ne�d��M�o�d�e E�n�a�b�le�d P�r�im�a�r�y:�E�n�a�b�le��on�l�y Combined Mode Option [SATA as Primary th�e��P��r�im��a�r�y��ID��E� controller. Secondary: Enable only the Secondary IDE controller. Both: Enable both IDE controllers. 3 Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help F9:Optimized Defaults ► OnBoard PCI IDE Controller [Disabled]: Disable the integrated IDE controller. [Primary]: Enable only the Primary IDE controller. [Secondary]: Enable only the Secondary IDE controller. [Both]: Enable both IDE controllers. ► OnChip SATA Channel [Disabled] : Disable SATA ports 1,2,3,4. [Enabled] : Enable SATA p��o�r�t�s��1�,�2�,�3��,4 ► OnChip SATA Type This item is used to set the operating mode of your SATA ports. Options : [Native IDE]; [RAID]; [AHCI]; [Legacy IDE]. [Native IDE] - This configures the SATA ports to support native IDE mode. [RAID] - When you enable RAID, it means all your SATA drives must also support AHCI. [AHCI] - The Advanced Host Controller Interface (AHCI) specification describes the register level interface for a Host Controller for Serial ATA. The specification includes a description of the hardware/software interface between system software and the host controller hardware. AHCI provides more advanced features including SATA features, but some SATA drives may not support AHCI, unless they are labeled with AHCI support in its specification. If your motherboard supporting AHCI, and you have a SATA device, which also supports AHCI, then you can select IDE option to have fair performance (only PATA, SATA level), or you can select AHCI to get its best performance. [Legacy IDE] - This configures the SATA ports to support legacy IDE mode which is running for old Windows system. ► SATA IDE Combined Mode [Disabled] : Disable SATA ports 5, 6. [Enabled] : SATA ports 5, 6 are used to simulate two additional IDE ports. You can select from PATA or SATA as the Primary IDE through the next "Combined Mode Option" setting. Four drives are displayed as IDE Channel 0 Master/Slave and IDE Channel 1 Master/Slave in "System Information" menu. 35