Foxconn A78AX-K English manual. - Page 40
► tRTP Internal Read to Precharge Command Delay
View all Foxconn A78AX-K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
3 strobe signals. ► tRP (Precharge Command Period) This item allows you to select the row precharge time (in clock cycles). ► tRTP (Internal Read to Precharge Command Delay) This time allows you to set the delay time (in clock cycles) between read command and precharge command. ► tRAS (Active-to-Precharge Delay) This item allows you to set the minimum RAS# active time (in clock cycles). ► tRC (Active-to-Active/Auto-Refresh Command Period) This item allows you to set the row cycle time (in clock cycles). tRC = tRAS + tRP. ► tWR (Write Recovery) This item allows you to select the write recovery time (in clock cycles). ► tRRD (Active-to-Active of a Different Bank) This item allows you to select a delay time (in clock cycles) between the RAS# and RAS# strobe signals. ► tWTR (Internal Write to Read Command Delay) This item allows you to select a delay time (in clock cycles) between sending the last data from a write operation to the memory and issuing a read command. ► tRWTTO (Read-to-Write Turnaround for Data, DQS Contention) This timing parameter ensures read-to-write data-bus turnaround. ► tWRRD (Write to Read DIMM Termination Turn-around) This timing parameter accounts for termination timing when a write is followed by a read to a different DIMM. DIMM. ► tWRWR (Write to Write Timing) This timing parameter accounts for turn-around timing when a write is followed by a write to a different DIMM. ► tRDRD (Read to Read Timing) This timing parameter accounts for turn-around and termination timing when a read is followed by a read to a different chip select. ► tRFC0, 1 (Auto-Refresh-to-Active/Auto-Refresh Command Period) Refresh to Refresh or Refresh to Active command interval. tRFC1: auto-refresh row cycle time for logical DIMM 1. tRFC0: auto-refresh row cycle time for logical DIMM 0. 33