Fisher and Paykel WA42T26GW1 EcoSmart Clothes Washer Installation Instructions - Page 9
Operation, Special instructions - lowes
View all Fisher and Paykel WA42T26GW1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Installation instructions 7 US CA 6 Close the lid. Visually check that the lid and topdeck are aligned. If not aligned, adjust the feet again until the lid and topdeck match (Fig.10). 7 Turn on water and check hose connections for leaks. Check that there are no kinks in the hoses. Important! Check all connections for leaks after turning faucets on, and again after 24 hours. 8 Uncoil the power cord, remove and discard the plastic pin cover and plug into wall socket. Wind left foot down (out) to correct Lid alignment Lid Topdeck Lid Topdeck Lid Wind right foot down (out) to correct Topdeck Fig.10 To assess leveling check lid alignment Operation 1 Check for leaks, noise, vibration, correct water temperatures and proper operation in spin. Check that the lid locks during spin. 2 Turn hot and cold water faucets off when washer is not in use. Special instructions The washer may give warning signals when low water pressure, or drain problems are encountered. See "If your Ecosmart™ beeps for help" (page 30). If further help is needed concerning this appliance, refer to 'Service', page 37.