Fagor 24 Inch Bmf-300x BMF-300X Installation Manual - Page 6

6 6. Loosen screws used to hold the middle hinge and remove middle hinge. Then remove the lower door. 9. Place the refrigerator flat on the floor, remove adjustable feet and self-tapping screws. Remove the front foot fixed bracket and lower hinge. Washer 7. Place the lower door on a smooth surface facing upwards. Change the handle to the right side by following step 5 described in page 7. Remove the selftapping screws, detach the stop block and door holder. Note: The washer may stick to lower door. 10. Unscrew the lower hinge, change it to the opposite side and reattach and mount washer. Turn the door holder 180° and then install it and the spare stop block on the opposite side with the self-tapping screws. 11. Change lower hinge part to the left side and front foot fixed board to the right side, then fasten with self-tapping screws. Finally install adjustable feet. 8. Place the screw hole covers on the middle plate on the opposite side. 12. Install the lower door by sliding it in a downward motion and align the lower hole site on the bottom of the door and the upper hinge site. Turn the middle hinge piece 180°, change the washer on the axis to the upper side, adjust the middle hinge to the appropriate position and then reinstall it. Note: The washer may stick to lower door. Washer