Fagor 24 Inch Bmf-300x BMF-300X Installation Manual - Page 5

5 4. Remove the upper hinge by removing the three self-tapping screws indicated in the image below. Door racks 2. Remove the upper cover on the top of the refrigerator starting from the right side and then remove the upper cover of the upper door. Note: Please hold the upper door by hand during step 4 to prevent door from dropping. 5. Remove the upper door by lifting vertically and place it on a smooth surface with the panel facing upwards. Then remove the corner cover and the upper hinge cover, this may require you to slightly open the door. Put all parts into the plastic parts bag. Remove the handle screw covers and screw hole covers, then remove the self tapping screws. Remove the handle and switch it to the right side, then install the self-tapping screws, handle screw covers and screw hole covers. 3. Disconnect all the wiring harness connectors and ground wires.v Remove cover on the cabinet body shown in image 3. Loosen the self-tapping screws, detach the stop block and door holder. With the handle in place, reinstall the door holder and the spare stop block found in the plastic bag. Do not use the one you just removed, that one must be stored in the plastic parts bag.