Epson TM-U950P Specifications - Page 83

[Reference] DLE EOT, Appendix B: Transmit Status Identification [Notes when the printer is used with the MICR reader] When the printer recovers from an error using DLE ENQ 1, and MICR function is selected using FS a 0, the printer clears the print buffer, ejects the slip completely, and goes to two-sheet mode. Therefore, when personal check reading is to be continued, select MICR function again using FS a 0. When the printer recovers from an error using DEL ENQ 2 with the MICR function selected using FS a 0, the printer clears the receive and print buffers, ejects the slip completely, and goes to two-sheet mode. Therefore, when check reading is to be continued, select MICR function again using FS a 0. DLE ENQ 3 is ignored, except when the printer is in the slip or personal check waiting state. Therefore , be sure to confirm whether slip paper is selected and the printer is in the slip waiting state using DLE EOT 5 before executing DLE ENQ 3. Or, be sure to confirm whether MICR function is selected and the printer is in the personal check waiting state using DLE EOT BS 1. After the printer is released from the slip or personal check waiting state, receipt and journal papers are selected. When the slip or personal check waiting status is canceled by DLE ENQ 3, the receive and print buffers are cleared. This command is ignored while the printer transmits reading results of MICR. [Reference when the printer is used with the MICR reader] DLE EOT BS TITLE EPSON TM-U950/U950P Specification (STANDARD) SHEET REVISION NO. NEXT AB 5554 SHEET 5534-1