Epson TM-U950P Specifications - Page 61

2) For parallel interface model SW1 1 2 3 4 5 6 7 8 Table 3.3.4 DIP Switch 1 Function Undefined ON -- Undefined -- Undefined -- Undefined -- Undefined -- Internal use -- Undefined -- Undefined -- OFF ------ Fixed --- SW2 1 2 3 4 Table 3.3.5 DIP Switch 2 Function Auto line feed ON Always enabled Receive buffer Font selection (default) 32 bytes 9´9 Carriage moving speed (default for paper roll printing) Low 5 Handshaking (BUSY condition) Receive buffer-full 6 Internal use 7 Undefined 8 Internal use Fixed -Fixed OFF Always disabled 2048 bytes 7´9 High Off-line or receive buffer-full ---- NOTES: DIP switches excluding switch 2-8 (I/F reset signal) are effective only while the printer power is turned on. If the DIP switch setting is changed after the printer power is turned on, the change is not effective. If DIP switch 2-8 is on while the printer power is turned on, the printer may be reset, depending on the signal state. DIP switches should not be operated while the printer power is turned on. TITLE EPSON TM-U950/U950P Specification (STANDARD) SHEET REVISION NO. NEXT A 3357-1 SHEET 36