Epson TM-T88V TM-T88V Technical Reference Guide - Page 45
Attaching the Connector Cover
View all Epson TM-T88V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Chapter 2 Setup Attaching the Connector Cover When using the connector cover, attach the connector cover. Follow the steps below to attach the connector cover to protect cables. 1 Turn over the printer. 2 Position the two hooks on both sides of the connector cover so that they hook the printer case. Hooks 2 3 Push the connector cover down to click onto the printer case. 4 Pass each cable through the cable exits at the bottom of the connector cover. 5 Turn over the printer and make sure the cables are not pinched. 45
Chapter 2
Setup
45
2
Attaching the Connector Cover
When using the connector cover, attach the connector cover.
Follow the steps below to attach the connector cover to protect cables.
1
Turn over the printer.
2
Position the two hooks on both sides of the connector cover so that they
hook the printer case.
3
Push the connector cover down to click onto the printer case.
4
Pass each cable through the cable exits at the bottom of the connector
cover.
5
Turn over the printer and make sure the cables are not pinched.
Hooks